BSWLD - GALLIC ACID, R-7046

  • MSDS: BSWLD
  • Manufacturer: TAYLOR TECHNOLOGIES INC
  • Product Name: GALLIC ACID, R-7046
  • National Stock Number: 6810-00N042219
Product Identification

Product ID:GALLIC ACID, R-7046
MSDS Date:07/01/1988
FSC:6810
NIIN:00N042219
MSDS Number: BSWLD

Responsible Party
TAYLOR TECHNOLOGIES INC
31 LOVETON CIRCLE
SPARKS, MD 21152
US

Emergency Phone: 301-472-4340

Info Phone: 301-472-4340

Preparer: STEPHEN BACON

Cage: EO526

Contractor
TAYLOR TECHNOLOGIES, INC
SPARKS, MD 21152 US

Telephone: 401-472-4340

Cage: 89975

Ingredients

GALLIC ACID

CAS: 149-91-7

RTECS: LW7525000

Fraction By Weight: 100%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DUST IRRITATING TO SKIN, EYES,
AND RESPIRATORY TRACT. CONTACT W/SKIN CAN CAUSE IRRITATION. CONTACT
W/EYES CAUSES MODERATE TO SEVERE IRRITATION. INGESTION CAN CAUSE GI
IRRITATION WITH NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. IF BREATHING DIFFICULT, CONTACT
PHYS & GIVE OXYGEN AS NEEDED. SKIN: WASH THORO W/SOAP & WATER. IF
IRRIT PERSISTS, SEEK MED ATTN. EYES: FLUSH WELL FOR @ LST 15 MIN
W/WATER. IF IRRIT PERSISTS, GET MED ATTN. INGEST: CONTACT PHYS &
GIVE LG AMTS OF WATER. INDUCE VOMITING UNDER DIRECTION OF PHYS.

Fire Fighting

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MAY EMIT ACRID SMOKE AND FUMES UNDER FIRE
CONDITIONS.

Accidental Release

Spill Release Procedures:SWEEP UP & CONTAINERIZE FOR LATER DISPOSAL.
AVOID RAISING DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID BREATHING DUST & UNNECESSARY
CONTACT W/POWDER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED DUST MASK SHOULD BE WORN
WHEN HANDLING LARGE QTY.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:GENERAL PURPOSE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
HMIS(LEVIEN) NOTES THAT THE ORAL LD50 (RBT) IS 5G/KG. MATL TO AVOID:
CARBONATES, AND SILVER SALTS.

Chemical Properties

HCC:T6
Solubility in Water:SLIGHTLY
Appearance and Odor:WHITE, ODORLESS POWDER

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONT W/FERRIC SALTS, OXIDIZERS, CHLORATES, PERMANGANATE, AMMONIA,
LEAD ACETATE, ALKALI HYDROXIDES & (SUPP DATA)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSE OF BY INCINERATION OR OTHER METHOD
APPROVED OF BY LOCAL, STATE, OR FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.